DPA 2006 A

DPA 2006 A
DPA 2006 A DPA 2006 A
Výrobce: DPA MICROPHONES
Model: DPA 2006 A
Dostupnost: Na dotaz
Cena: 26 620Kč
Bez daně: 22 000Kč

Všesměrový mikrofon (koule) s předzesilovačem ve standardním provedení. Tento model je postavený na inovativní dvojmembránové technologii, vyvinuté firmou DPA. Vyniká čistým a dynamickým zvukem a je vhodný jak pro studiové nahrávání tak i pro ozvučování (je velmi robustní). Mikrofon je součástí modulární série DPA Reference Standard, takže lze vhodně kombinovat s dalšími vložkami a předzesilovači z této série. Mikrofon je vybaven standardním studiovým tělem mikrofonu (typ A)

2006A Twin Diaphragm Omni Microphone

  • Modular flexibility
  • Twin-Diaphragm-Capsule technology
  • Acoustic authenticity
  • Linear in a large frequency bandwidth

Redefining value for money

The new DPA 2006 microphone has strong references to the acclaimed DPA 4006 omni microphone – by its type number 06, its overall sound character, and its industrial design.

The difference is in the capsule technology that in the 2000 series features the new Twin Diaphragm Capsule technology. Comparison with its big brother, the iconic 4006, is inevitable. The relationship between the two is clearly heard from the first 2006 audio glance; the 2000 series simply performs like much more exclusive microphones from the premium class and redefines the term value for money.

Modular upgradability

2006A is part of the flexible d:dicate Recording Mics series. The 2006A with the MMP-A preamplifier is the audiophile’s choice with low distortion and total accurate and faithful sound, where the 2006C MMP-C compact preamplifier offers a subtle character alteration with a bit more “body” to the low end – in addition to its easier-to-position approach.

At any time and with no tools necessary it is possible to transform the basic 2006 microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

Twin Diaphragm Capsule technology

The overall distinctive sound image from the DPA miniatures is so well balanced that it meets the high demands of the DPA Reference Standard league.

In a 2006 capsule two opposite facing miniature capsules are custom re-built into a double diaphragm, one-capsule composition. This combines the advantages of small capsules (fast impulse response and large frequency bandwidth) with lower inherent noise achieved from a larger diaphragm area.

The capsules are loaded to the supreme Reference Standard preamps instead of the tiny miniature FET preamp from the miniature mics, offering even more air and precision.

Dedicated to acoustic authenticity

Every engineer and musician concerned with getting the precise acoustic fingerprint on track will be pleased by the true tone delivered by the 2006. Acoustic piano, guitar, wind instruments and choirs are among the most evident applications.

Specifications for 2006A Twin Diaphragm Omni Microphone

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
Minimum load impedance: 2 kohm
Dynamic range: Typ. 114 dB
Max. SPL, peak before clipping: 141 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Microphone weight: 160 g (5.6 oz)
Microphone diameter: 19 mm (0.75 in)
Microphone length: 164 mm (6.5 in)
Output voltage, RMS: > 5 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%

 

Napsat recenzi

Vaše jméno a příjmení:


Vaše recenze: Poznámka: HTML tagy nebudou převedeny!

Hodnocení: Nejhorší            Nejlepší

Opište prosím kód z obrázku do pole níže:



Tento e-shop je umístěn na serveru ELEKTROAKUSTIKA.CZ. Používá se opensource systém OpenCart
MIKROFONY © 2017