SHURE SLX 1

SHURE SLX 1
Výrobce: SHURE
Model: SHURE SLX 1
Dostupnost: 3 až 5 dní
Cena: 6 530Kč
Bez daně: 5 397Kč

UHF kapesní vysílač s automat. laděním frekvence


Bodypack Transmitter

The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo.

  • Automatic Transmitter Setup
  • Backlit LCD with timeout feature
  • Frequency and power lockout
  • 3-segment battery fuel gauge
  • 2 AA batteries (included) provide 8 hours continuous use
  • 470 - 782 MHz operating range
  • Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")

SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

 

Uživatelský manual (EN)

Datasheet (EN)

System specikations (EN)

Brochure (EN)

Easy Setup

  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • Removable antennas and rack hardware included

Exceptional Audio quality

  • Shure’s Patented Audio Reference Companding improves sound quality
  • Wide s selection of Shure microphone heads, headsets and lavaliers
  • Predictive Diversity technology for improved transmission quality

Complete installation solutions

  • Up to 12 compatible frequencies per band
  • Furnished rack hardware included for single or double mounted installation in a standard 19“ rack.
  • Detachable 1/4 wave antennas
  • Rugged metal chassis
  • Multi-function, backlit LCD on transmitter and receiver

System technical specifications

  • Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second. band (up to): 12
  • Selectable frequencies: 960
  • Auto Setup Features: Scan/Sync
  • Audio Reference Companding: Yes
  • Included Antennas: Removeable 1/4-wave
  • Antenna Options: Yes
  • Receiver Network Ability: No
  • PC Control: No
  • Rack Hardware: Included
  • Case: Optional System Case (WA610)
  • Transmitter Display: Backlit LCD + Multi-color LED
  • Receiver Display: LCD + LEDs
  • Battery, Endurance: 2AA, >8 h
  • Environment: Installation and touring

Further Technical Specs

Dimensions 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight 816 g (1 lb. 13 oz.)

Housing Galvanized steel

Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): –13 dBV

1/4 inch connector (into 3000 Ω load): –2 dBV

Output ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it. XLR connector: 200 Ω, 1/4 inch connector: 1kΩ

XLR output ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it, balanced

Pin 1: Ground, Pin 2: (+), Pin 3: (-)

SensitivityThis is how mich signal a microphone produces for a given amount of sound. –105 dBm for 12 dB SINAD, typical

Image Rejection >70 dB, typical

Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply

Operating Range Under Typical Conditions 100m (300 ft.)

Note: Actual range depends on RF signal absorption, reflection, and interference

Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up. (+/– 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

Note: Overall system frequencyThis is how many times a sound or radio wave oscillates in one second. depends on microphone element.

Total Harmonic DistortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces. (ref. +/– 38 kHz deviation, 1 kHz tone) 0.5%, typical

Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up >100 dB A-weighted

Operating Temperature Range –18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it. output) and the tip of the high impedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it. 1/4-inch output.

Logic Connections (SLX4L only)

Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA.

Absolute maximum -0.7 to 5.5V DC
Pin 2: Logic ground
Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA.

Absolute maximum -0.7 to 5.5V DC

Napsat recenzi

Vaše jméno a příjmení:


Vaše recenze: Poznámka: HTML tagy nebudou převedeny!

Hodnocení: Nejhorší            Nejlepší

Opište prosím kód z obrázku do pole níže:



Tento e-shop je umístěn na serveru ELEKTROAKUSTIKA.CZ. Používá se opensource systém OpenCart
MIKROFONY © 2018